Home / Rapid Test Reagents / β-Agonist 3-in-1 Rapid Test Strip

β-Agonist 3-in-1 Rapid Test Strip

rapid testReagents · LFG11702 · Yetta Bio

β-Agonist 3-in-1 Rapid Test Strip - rapid testReagents - Yetta Bio

β-Agonist 3-in-1 Rapid Test Strip

Rapid Test Reagents · Food Safety Rapid Testing

LFG11702📦 10T📝 Colloidal Gold Strip · For fruits, vegetables & grains · 6 samples≤20 min

Colloidal Gold Strip · For fruits, vegetables & grains · 6 samples≤20 min

← Rapid Test Reagents List
📦
Spec
10T
🏷️
SKU
LFG11702
🧪
Sample Type
fruits, vegetables & grains
⏱️
Test Time
6 samples≤20 min
Performance
6 samples≤20 min · For fruits, vegetables & grains · Shelf Life: 12 months
🌡️
Storage
Store at 2–30°C away from light
📅
Shelf Life
12 months
📜
Regulatory Basis
Rectification Office Letter [2010] No.50
KJ 201712
🔧Required Equipment & Consumables
🔬Equipment
(1) homogenizer, (2) balance (resolution 0.01 g) , (3) vortex mixer, (4) Centrifuge (Min. Speed >3000r/min) , (5) water bath, (6) Pipette Set (20-200µL, 100-1000µL) , (7) Colloidal Gold Analyzer (Optional)
📦Consumables
15 mL Centrifuge Tube
📋Test Procedure Guide
1
📝 Sample Preparation
Weigh 4.00±0.05 g homogenized sample into a 15 mL Centrifuge Tube. (screw-cap type recommended; 15 mLCentrifuge Tube, snap-cap tubes may pop open when heated) Add 500 μL Sample Extractant, vortex1 min. place in a 80°C water bathwater bath10 min, thenTake Out, 4000 rpmroom temperature (20–25°C) Centrifuge5 min, 待upper layerClearSolution体cool toroom temperatureAfter That, ImmediatelyassampleSolution.
2
🧪 Test Procedure
Read the operating instructions carefully before the experiment. Before use, equilibrate the test card and the test sample to room temperature. Remove the reagent bucket and test strip bag from their original packaging. After opening, take out the required number of microwell reagents and test cards, and label them. Use within 60 min as soon as possible. Using a pipette, transfer 200 μL of the test sample solution into each microwell for clenbuterol, ractopamine, and salbutamol. Slowly aspirate and mix thoroughly with the microwell reagent. Incubate at room temperature for 5 min. After incubation, use a pipette to transfer 60 μL of the clenbuterol microwell mixed solution and vertically dispense it into the left sample well (S well), or use the disposable dropper provided in the kit to vertically and slowly add 2 drops of the clenbuterol microwell mixed solution into the left sample well (S well); transfer 60 μL of the ractopamine microwell mixed solution and vertically dispense it into the middle sample well (S well), or use the disposable dropper to vertically and slowly add 2 drops of the ractopamine microwell mixed solution into the middle sample well (S well); transfer 60 μL of the salbutamol microwell mixed solution and vertically dispense it into the right sample well (S well), or use the disposable dropper to vertically and slowly add 2 drops of the salbutamol microwell mixed solution into the right sample well (S well). Start timing when the liquid begins to flow. After a reaction time of 5 min, read the result immediately according to the schematic diagram. Results read at other times are invalid.
Purchase Inquiry