Home / Rapid Test Reagents / Quinolones Rapid Test Strip

Quinolones Rapid Test Strip

rapid testReagents · LFG00701 · Yetta Bio

Quinolones Rapid Test Strip - rapid testReagents - Yetta Bio

Quinolones Rapid Test Strip

Rapid Test Reagents · Food Safety Rapid Testing

LFG00701📦 10T📝 Colloidal Gold Strip · For livestock/poultry tissue, urine · 6 samples≤20 min

Colloidal Gold Strip · For livestock/poultry tissue, urine · 6 samples≤20 min

← Rapid Test Reagents List
📦
Spec
10T
🏷️
SKU
LFG00701
🎯
LOD
Not Detected (ND)
MARA Announcement No. 235
🔬
Method
Colloidal Gold
🧪
Sample Type
livestock/poultry tissue, urine
⏱️
Test Time
6 samples≤20 min
Performance
Colloidal Gold · 6 samples≤20 min · For livestock/poultry tissue, urine · Shelf Life: 12 months
🌡️
Storage
Store at 2–30°C away from light
📅
Shelf Life
12 months
📜
Regulatory Basis
GB 31650-2019
KJ 201704
🔧Required Equipment & Consumables
🔬Equipment
(1) homogenizer, (2) balance (resolution 0.01 g) , (3) vortex mixer, (4) Centrifuge , (5) Pipette Set (20-200µL, 100-1000µL) , (6) Colloidal Gold Analyzer (Optional)
📦Consumables
10 mL Centrifuge Tube
📋Test Procedure Guide
1
📝 Sample Preparation
homogenized tissue sample. Weigh 2.00±0.05 ghomogenateTissue AfterSample至10 mL Centrifuge Tube, add 2 mLSamplediluent (Shrimp MeatSampleneed80°Cwater bath5 min) , vortex mixervortex2 minSufficientlyMix well. 3000~4000 r/minCentrifuge5 min. 取50 μLupper layer相forClearSampleSolution (such asPart/PortionSampleoils & fatstoo多, upper layerasWhiteEmulsion TurbidSolution时, Take the Intermediate PhaseforClearPart/Portion) 至2 mL Centrifuge Tube, add 850 μLSamplediluent, Mix well, 得tosample solution.
2
🧪 Test Procedure
please read the operating instructions carefully. Before use, allow the test strip and saBefore the experiment, please read the operating instructions carefully. Before use, allow the test strip and the sample solution to equilibrate to room temperature. Remove the test strip from the original packaging, mark it, and use immediately. Using a micropipette, aspirate 100 µL of the sample solution and add it vertically and slowly into the sample well (S well), or use the disposable dropper provided in the kit to aspirate the sample solution and add 3 drops vertically and slowly into the sample well (S well). Start timing when the liquid flows. React for 8 min. Immediately interpret the result according to the schematic diagram. Interpretations made at other times are invalid.
📋Sample Prep Guide
1Sample Type
Tissue, Aquatic Products
2Sample Weight
2.00g
3Centrifuge Conditions
3000-4000r/min, 5min
4Evaporation Temperature
No evaporation needed
5Key Reagents
Samplediluent
⚠️Special Notes
Shrimp MeatSampleneed80°Cwater bath5min
Purchase Inquiry